Application place and material selection of industrial brush

With the continuous development of China's industry, industrial brush is also an indispensable part of some industrial machinery and equipment. The following is the application description of industrial brush:
1. Industrial brush is applied to metal surface treatment, mainly in several aspects:
(1) Surface roughing treatment (grinding, roughening, rust removal and dust removal)
(2) Surface cleaning treatment (parts cleaning, food and vegetable cleaning, peeling, decontamination and degreasing)
(3) Surface finishing (grinding, deburring, polishing)
2. Material selection for industrial brush application:
For the correct selection of industrial brush, firstly, the appropriate brush wire material should be selected according to the physical and chemical properties of the treated material, such as material surface finish, hardness, etc; The shape of the brush is selected according to the working conditions; Calculate the brush size and speed according to the process parameters. In general, the larger the diameter of the circular brush, the better the effect. Under the condition of the same diameter, the shorter the brush wire, the stronger the grinding force, and the longer the brush wire, the weaker the grinding force.
3. Treatment method for brush failing to achieve the expected effect:
(1) Brush effect is too weak:
——Choose a brush with large diameter or increase the speed (no more than the larger speed) to increase the linear speed,
——Reduce the length of silk,
——Use a thick wire brush instead.
(2) Brush effect is too strong:
——Choose a brush with small diameter or reduce the speed to reduce the linear speed,
——Increase the silk eating length,
——Use a fine wire brush instead.
(3) The surface is too rough:
——Choose a brush with large diameter or increase the speed (no more than the larger speed) to increase the linear speed,
——Reduce the length of silk,
——Use a thick wire brush instead.
(4) The surface is too smooth
——Choose a brush with small diameter or reduce the speed to reduce the linear speed,
——Increase the silk eating length,
——Use a fine wire brush instead.