Brief introduction to the application of tablet type brush roller in metallurgical industry
In modern metallurgical industry, many production processes and processes will be applied to brush roller products, which are briefly introduced below.
1. Pre pickling line: mainly used for descaling by brush rollers.
2. Pickling line: it mainly uses brush rollers to remove stains generated in the pickling process.
3. Cleaning line: activate the ester containing surface for effective degreasing; And remove the continuous oil stain in the electrolyte solution; Rust or oil stains can be removed at a linear speed of less than 150 m / min.
4. Wire rod and steel tube: mainly used for descaling.
5. Stainless line: descaling with brush roller to avoid silver bronze effect; It can also heat anneal the pickling line, reduce the height of peak and valley (polishing), and can be applied to the finishing process of continuous annealing pickling line.
6. Coil coating: in order to obtain effective chromium treatment and the coating is closely attached to the steel plate.
7. Galvanizing line: used to remove impurities on the surface of steel plate and activate the surface of steel plate; Wash the steel plate surface with water.
8. Surface treating steel line: it is used to clean the plate before plating, and activate the surface of the plate by light grinding.
9. Roll polishing: brush rollers can be used to remove impurities on the surface of work rolls.
