Detailed introduction of steel wire brush roller

Steel wire brush roller is widely used in many industries, but I believe most people still don't understand how to make steel wire brush roller. Let's briefly say the method of making steel wire brush roller.

Firstly, the roll body is formed, and the corresponding roll body is made according to the different requirements of different industries. Generally, it can be divided into general injection molding, steel rod attachment injection molding and corresponding plate direct grinding and trimming. In the production process, there should be professional technicians to carry out operation, inspection, repair and commissioning, as well as masters responsible for full-time lathe, welding and auxiliary butt sleeve molding

The second is the drilling of the roll body. After the roll body is formed, the drilling operation can be carried out according to the process requirements. The drilling methods include spiral type, ordinary type and herringbone type. The diameter and spacing of the hole can be determined according to the requirements. If there is a threading brush body, it may be necessary to require perforation drilling, or it is also possible to perforation after some special processing of the plate body.

The third is wire planting. The brush wire of the steel wire brush roller is high-strength copper plated steel wire, black steel wire, stainless steel wire and other raw materials. The brush wire of these raw materials can increase the service life of the brush roller, improve the work efficiency and shorten the polishing time. Then, the steel wire brush roller shall be flattened and polished. First, the steel wire shall be trimmed, and then the corresponding grinding tools shall be used for processing and grinding, so as to achieve the effect of smoothness and flatness. Be sure to remember to deal with the broken wires produced in the grinding process.

After reading this article, I hope you have a simple understanding of how the steel wire brush roller is made