Effect of cleaning brush roller

The influence of the pressure between the brush roller and the rubber roller on the cleaning effect. The pressure between the brush roller and the rubber roller determines the cleaning effect of the rubber roller. If the pressure is small, the rubber roller will not be cleaned; and if the pressure is too large, the service life of the rubber cloth will be affected. Based on the water marks formed on the rubber drum when the brush stick is stationary, we study the pressure between the brush roller and the rubber drum to achieve the best cleaning effect.
The brush roller has been tested for many times. The results show that when the water mark on the rubber drum is about 9mm, the cleaning effect is the best, and the wear to the coarse brush is small. At this time, the cylinder pressure is 1.95 mpa
Dynamics analysis of brush roller of cleaning device
The dynamic qualitative analysis of the cleaning device mainly includes the rotary dynamic analysis of the brush roller and the centrifugal force analysis caused by bending. In an ideal state, the brush roller can be regarded as a circular body with stable movement, but in the actual production process, it is impossible to be completely concentric in the process of wall panel sizing on both sides. From the perspective of mechanical dynamics, when the high-speed rotating rigid body makes regular precession, the gyro pressure generated is far greater than the pressure generated by the ideal movement. Therefore, it is necessary to study the influence of single factor on the mechanical properties of brush dropout from the perspective of wall panel eccentricity and bending deformation.