How to clean the refrigerator correctly?

1. Cut off the power supply.
Take out the food in the refrigerator first, and then take out the shelves, fruit and vegetable boxes and bottle frames in the refrigerator. The accessories can be wiped with a rag dipped in water mixed with detergent. After cleaning
Wipe dry with a rag or put it in a ventilated and dry place to dry naturally.
The tray connected to the sewage at the back cover, the rubber sealing strip of the I door of the refrigerator, the drain hole of the refrigerating room, etc. are all easily ignored. The smell that cannot be dissipated in the refrigerator is usually
It also comes from these places, which cannot be ignored during cleaning
2. Clean the refrigerator door seal.
If there are colored dirt and spots in the groove of the refrigerator I] rubber sealing strip, the refrigerator I] may not be closed tightly and the operation efficiency of the refrigerator may be affected. Attention must be paid to cleaning.
Old toothbrush at home_ Apply detergent to the groove, and then dry it with a dry cloth; You can also wrap chopsticks with kitchen paper towels dipped in detergent or with alcohol
Cotton swab cleaning.
3. Defrost the refrigerator.
If the ice in the refrigerator is too thick, do not chisel or shovel with hard objects to avoid damaging the condensation pipe. Let the refrigerator naturally defrost before wiping. To quickly remove the ice, after unplugging the power supply,
Blow out the ice cubes with a blower to make them loose and fall off.
4. Clean the refrigerator door panel.
The cleaning of refrigerator door panel is relatively simple. Wipe with a sponge or a cloth dipped in a little detergent for several times, and then dry the water with a dry cloth. It can be slowly wiped with a soft cloth dipped in a little calender paste,
Strong detergency; Some stains are too firm and can be scrubbed with different brushes.
5. Clean the compressor and condenser.
The compressor and condenser are located at the back and both sides of the refrigerator. These positions are prone to dust, affecting heat dissipation, shortening the service life of parts and weakening the cooling effect.
Cleaning is very simple. Just use a clean refrigerator cleaning brush or a dry cloth to remove the dust, but be careful not to use a wet cloth.