Method of brushing paint flakes with a brush

The surface drying speed of paint chips is very fast, usually 7-10 minutes at room temperature. Therefore, when brushing the paint sheet, the brushing time per square meter should be controlled
It takes more than three minutes. If the brushing time is too long, the paint film is sticky (dry), and the brush cannot be pulled. After drying, the thickness of the paint film is uneven and the brush lines are rough. Especially with colored paint
The film should be dipped and brushed quickly to prevent uneven color, which is the key to brush the film well. When brushing, the size and shape shall be determined according to the coated object
Shape, choose high-quality row brush or wool brush with appropriate width. Brush from one end of the object surface to the other without staying in the middle to prevent slagging at the lap joint. as
The board surface of the wood brushing room shall be painted 1-2 times along the wood grain quickly every time. When brushing, the brush shall be straightened to make the brush grain straight and neat. After each side is fully painted,
Collect the edge flow paint in time. Check while brushing. When continuous brushing is required, the interval between the front paint film and the rear paint film is about 8-10 minutes, -- generally every time
Continuously brush the paint for 2-3 times or 4-5 times. If continuous brushing is required, it shall be carried out after the paint film is dried for 4-6 hours to prevent one-time brushing from being too thick
Dissolve the bottom paint flake, resulting in slagging or uneven color.