The important role of the sanitation brush series

The sanitation brush is drilled at a certain angle on the cut polypropylene disk surface, and the cut flat steel wire or polypropylene brush wire is folded in half with the nylon wire and inserted in series. Install the brush on the municipal sanitation vehicle, so that the sanitation brush is made and can be used to clean the snow on the street.
The disk brush or steel wire disk brush installed on municipal sanitation vehicles for street cleaning is a representative type. Products include cleaning roller brushes, flat drum combined sweepers, roller type sweepers, sweeper brushes, square sweepers, circular branch sweepers, sewage treatment brushes, sweeper brushes, computer car wash brushes, etc. The disk type floor sweepers of sanitation vehicles are made of high-strength plastic brushes to clean dirt on the ground; The broom is made of a roller brush, and the material can be polypropylene brush wire, nylon wire, or steel wire.
At the construction site, due to the presence of many sand, stone particles, etc., the sanitation brush will be replaced with a different identity and clothing than when cleaning the road. If the sanitation brush cannot be cleaned along the road, even leading to premature death of the sanitation brush, it is necessary to use a sanitation brush made of hard material before it can be put into use. At the same time, it is also required that the road surface is not damaged on the right side and is generally made of steel wire to meet the above two requirements.
Similarly, facing the task of sweeping snow, the sanitary brush also needs to be replaced with a vest, which can be made of polypropylene and elastic steel wire. No matter how thick the snow is swept, even the ice layer can be swept smoothly, and there is no need to sprinkle salt or generate ice. This cleaning and sanitation brush can be used directly, causing no harm to the road surface and bringing convenience to pedestrians.